是德N3306A,Keysight N3306A电子负载模块_直流电子负载

产品展示

您当前的位置：首页 » 产品展示 » 直流电子负载 » 是德N3306A,Keysight N3306A电子负载模块

产品名称：	是德N3306A,Keysight N3306A电子负载模块
产品型号：	N3306A
品牌：	1531
产品数量：
产品单价：	面议
日期:	2024-09-19

是德N3306A,Keysight N3306A电子负载模块的详细资料

是德N3306A,Keysight N3306A电子负载模块
N3306A 600 W 电子负载模块
Keysight N3304A电子负载模块可在N3300A或N3301A主机中使用。它不能在主机外工作。这一新系列模块快速和，可用于CC、CV或CR模式程序，或进行电压、电流和电阻测量。它也可用于波形的数字化。通过主机，该模块可在GPIB、RS-232上或手动操作。
主要特性与技术指标

Input Ratings

Current: 0 - 120 A
Voltage: 0 - 60 V
Maximum Power @ 40°C: 600 W
Typical Minimum Operating Voltage @ Full Scale Current: 1.4 V

Constant Current Mode

Low Range/High Range: 12 A/120 A
Regulation: 10 mA
Low Range Accuracy: 0.1% + 15 mA
High Range Accuracy: 0.1% + 37.5 mA

Constant Voltage Mode

Low Range/High Range: 6 V/60 V
Regulation: 20 mV
Low Range Accuracy: 0.1% + 3 mV
High Range Accuracy: 0.1% + 8 mV

Constant Resistance Mode

Range 1 (I >10% of current rating): 0.017-1
Range 2 (I >1% of current rating): 0.9-10
Range 3 (I >0.1% of current rating): 9-100
Range 4 (I >0.01% of current rating): 90-1000

是德N3306A,Keysight N3306A电子负载模块
选件与附件：

N3302A-A6J	ANSI Z540-1-1994 Calibration
N3302A-UJ1	8mm screw terminal
N3302A-UK6	Commercial calibration certificate with test data

用于 N3300 系列和 6060B/6063B 电子负载模型的选件 800、908、909 机架安装

这些选件可为电子负载提供包含多种配置的机架安装套件。选件 800 可以并排安装两个主机。选件 908 和 909 仅适用于在机架上安装的单台仪器。套件包括 1 个上架镶条、1 个把手和 4 个与该仪器连接的螺钉，还有 4 个机架螺钉和若干个螺母。

当您下达原始订单时可以同时订购选件 909、908 或 808。如果您已经拥有电源，您可以根据下表订购。

电源型号	机架安装部件编号（选件 908）机架安装套件	机架安装部件编号（选件 909）带把手的机架安装套件	机架安装部件编号（选件 800）机架安装套件，用于并排安装两个主机
6060B 6060B-J08 6063B	5062-3974C	5063-9219	无
N3300A	用于 N3300A 的两个部件编号 5062-3974	两个部件编号 5062-3975	无
N3301A	用于 N3301A 的一个部件编号 5062-3960，该套件包含一个空白填充面板	无	5061-9694 5062-3978

注：
选件要求使用滑轨套件（1494-0059）或支持轨道（E3663AC），以支撑负载主机的重量。

是德N3306A,Keysight N3306A电子负载模块

The Keysight N3304A-J01 is a special order option that increases the input voltage from 60 V to 80 V. The N3304A-J01 is added to the standard N3304A DC electronic load module. You must also order the standard product, N3304A.

The N3304A is a 300 W electronic load module for use in either the N3300A or N3301A electronic load mainframe in system applications. The N3304A load module is fast and accurate, for programming in constant current, constant voltage, or constant resistance modes, or for making voltage, current or power measurements. The N3304A can also digitize waveforms.

Testing multiple output dc power supplies and DC-DC converters can be very time consuming if each output must be tested sequentially. If measurements are being made through a MUX using one DMM, this is what will happen. Using the built-in measurement capabilities of the N3300A electronic loads, all outputs can be measured simultaneously. Alternatively, multiple single output power sources can be tested simultaneously.

A single GPIB address is all you need for complete control and read-back of the N3304A load module within a single N3300A or N3301A mainframe. The N3304A electronic load provides fast operation and the accurate programming and read-back needed for high-volume DC power supply test systems.