产品中心
产品展示

  您当前的位置:首页 » 产品展示 » 直流稳压电源 » Aim-tti MX180TP可编程直流电源

产品名称: Aim-tti MX180TP可编程直流电源
产品型号: MX180TP
品牌: 1532
产品数量:
产品单价: 面议
日期: 2023-11-23

Aim-tti MX180TP可编程直流电源的详细资料

Aim-tti MX180TP可编程直流电源
Bench/System DC Power Supply, Multi-Range, Digital Control 378W, three full-performance outputs,  2 x 180 watts plus 1 x 18 watts, No InterfacesBench/System DC Power Supply, Multi-Range, Digital Control 378W, three full-performance outputs,  2 x 180 watts plus 1 x 18 watts, USB, RS232, LAN & GPIB Interfaces


  • 375 watts plus of total power
  • Two high power outputs plus one low power output
  • High power outputs each capable of 30 volts at 6 amps
  • Range switching provides up to 120 volts or up to 20 amps
  • Low power output provides up to 12 volts or up to 3 amps
  • Three high performance outputs, two of 180 watts each and one of 18 watts
  • Total power of 378 watts in a highly compact package
  • Range switching gives up to 120 volts and up to 20 amps
  • Twenty one range combinations for maximum flexibility
  • Up to 360 watts from a single output
  • Low output noise and ripple via linear final regulation
  • High setting resolution of 1mV and 1mA
  • Variable OVP and OCP trips on all outputs
  • 50 setting memories per output + 50 linked memories
  • Selectable voltage tracking (isolated tracking)
  • Selectable current meter averaging
  • Switchable remote sense on all outputs
  • Graphic LCD provides simultaneous output metering
  • Numeric or spin-wheel control of all parameters
  • Individual or combined output on/off control with programmable delay sequencing.
  • Front panel locking with optional pass-code protection
  • 3U half-rack case for bench or rack mounting
  • GPIB, RS-232, USB and LAN (LXI) interfaces (MX180TP)
Aim-tti MX180TP可编程直流电源
The MX180T has two outputs each capable of 0 to 30V at 0 to 6A, plus a third output of 0 to 5.5V at 0 to 3A.

Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch. Mixed-mode regulation To provide its impressive power density the MX series combines high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design.

Excellent line and load regulation is matched by low noise and good transient response. Range switching and power control range combinations graphicTo increase its ability to match a variety of applications, each output has more than one range.

Outputs one and two can provide either 60V/3A or 15V/10A as an alternative to 30V/6A, while output three can provide 12V/1..

When higher power is required, outputs one and two can be combined internally to provide up to 360 watts as either 30V/12A, 15V/20A, 60V/6A or 120V/3A from a single output. Remote control for system applications interfaces logoThe MX180TP incorporates USB, RS232, GPIB and LXI compliant LAN interfaces.

These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.

Duplicate power and sense terminals are incorporated at the rear.

The compact half-rack 3U size uses  front input ventilation which enables vertical and horizontal stacking without the need for additional ventilation space.

A 3U rack mount suitable for one or two units is available.
Aim-tti MX180TP可编程直流电源
DRIVER SOFTWARE SUPPLIED (MX180TP only)
IVI Driver An IVI driver for Windows is supplied. This provides support for common applications such as LabView*, LabWindows*, HPVEE* etc.
USB Driver An installation file is supplied which calls a standard Windows* USB driver.
* LabView and LabWindows are trademarks of National Instruments.
* HPVEE (now Agilent VEE) is a trademark of Agilent Technologies.
* USB interface is supported for Windows 2000, XP, Vista, 7 and 8 (including 64 bit versions).
Windows is a trademark of Microsoft.
Aim-tti MX180TP可编程直流电源
GENERAL SPECIFICATIONS
Input:
AC Input 110V to 240V AC ±10%, 50/60Hz. Installation Category II.
Input Power 600VA max.
Temperature & Environmental:
Operating Range +5ºC to +40ºC, 20% to 80% RH
Storage Range -40ºC to + 70ºC
Environmental Indoor use at altitudes up to 2000m, Pollution Degree 2.
Cooling Intelligent variable-speed fans.
Safety & EMC:
Safety Complies with EN61010-1
EMC Complies with EN61326